Pro Cleanse BC - Multi Surface Alkaline Cleaner/Premium Concrete Cleaner
Multi-Surface Alkaline Cleaner & Degreaser
Pro Cleanse BC™ is a powerful alkaline cleaner and degreaser formulated to deep clean a wide range of exterior surfaces including concrete, brick, limestone, granite, EIFS, vinyl siding, shingles, awnings, and fiberglass.
When used outdoors, Pro Cleanse BC™ removes oxidation, carbon, oil, tire marks, grease, and other stubborn soils—without the need for brushing. On concrete, it not only cleans but also brightens the surface for a fresh, renewed appearance.
Key Applications:
Building restoration and exterior cleaning
Driveways, sidewalks, and dumpster pads
Restaurant drive-throughs and gas stations
Concrete brightening following soil removal
For full masonry restoration, pair Pro Cleanse BC™ with ProRestore 21™.
Compatible with pressure washers, low-pressure sprayers, brushes, and hot or cold water systems.
Directions for Use
Do not mix with bleach.
Do not allow product to dry on hot surfaces.
Pre-wetting is generally not required.
Always test a small, inconspicuous area prior to full application. Allow surface to dry before evaluating results.
Protect adjacent surfaces not intended to be cleaned.
Application
Brushless Cleaning: Apply two quick applications of Pro Cleanse BC™ for complete soil release.
Pressure Washing:
Set the metering valve to the desired dilution rate.
Apply solution from the bottom up on a dry surface.
Rinse thoroughly from the top down.
Rinsing: Use no less than 700 PSI for effective rinsing. Adjust pressure to match substrate sensitivity.
Suggested Dilutions (Hot water allows for greater dilution)
Heavy Oil Stains / Stained Wood: 1:4 to 1:2
Medium Soil / Lighter Oil Stains: 1:30 to 1:40
Light Soil / General Degreasing: 1:10 to 1:20
Coverage rates: 100–250 sq. ft. per gallon, depending on porosity, texture, and severity of staining.
⚠️ Professional Use Only. Always follow safety guidelines and use appropriate PPE when handling.

























